Contents LEDs and Connections ............3 Specifications ..............4 Recommended Usage ............5 Warning....................5 Dismounting the Unit ................6 Troubleshooting ...................7 I can see the DriveStation in My Computer but I cannot access it. (Windows) ......................7 I cannot see the DriveStation.................7 My backup program cannot save files to the DriveStation......7 I cannot see the DriveStation in My Computer.
Specifications Check Buffalo’s website (www.buffalotech.com) for information about the latest products or compatible models. Interface USB 3.0 Connector USB 3.0 Micro-B Transfer speed 5 Gbps Maximum (USB 3.0) *1 External dimensions 39 x 187 x 120 mm (excluding protruding parts)
Recommended Usage Warning To avoid damage to data, never do any of the following while data is being accessed: - unplug the cables - turn off your computer - put your computer into standby, hibernate, or sleep mode - log off, log on, or switch users Never configure this unit as a destination for virtual memory.
If your Windows computer will not boot while this unit is connected, then connect the unit to your computer after rebooting Windows. Also, refer to your computer’s manual to change the BIOS setting to boot from an internal hard drive if you want to turn your computer on or off while this unit is connected. Some computers may display a delayed write when they return from an energy-saving state.
Troubleshooting I can see the DriveStation in My Computer but I cannot access it. (Windows) The drive may require formatting. Try using DiskFormatter2. Consult the manual for DiskFormatter2 for more help. I cannot see the DriveStation. Verify that the power LED is on. If it is not, then ensure that the power switch is in the on position. Check your cables! The DriveStation should be connected to your computer by a USB cable.