Table of Contents
Advertisement
7.1.2.
Special Modes Setting
Mode name
Rating password
The audiovisual level setting password is
initialized to Level 8.
Service Mode
Setting every kind of modes for servicing.
*Details are described in 7.1.3. (BD) Service
Mode at a glance.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The history has been
cleared] is displayed for five seconds.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
Aging
Perform sequence of modes as * Aging
Description shown below continually.
Item
Description
FL display
Same display as before execution.
Display in P-off mode.
Display following the then mode.
18
Key operation
Front Key
While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
[
]
Repeatedly press
remote control or [POWER] on the
unit until "03 VL" is displayed on the
unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Turn the power off.
Press the [5] [9] and [R] button
simultaneously for five seconds,
then [70 RET] is displayed on FL.
[
]
Press the [
] or
button to
select until [80 SRV] is displayed on
FL.
Press the [OK] button .
*The command is transmitted by
attached remote control.
When the power is on, disc is not in
tray, press [STOP] and [POWER
(Remote Controller)] keys simulta-
neously for 5 seconds.
While the unit is off, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
[
]
Repeatedly press
remote control or [POWER] on the
unit until "06 FTO" is displayed on
the unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Press [POWER] key over than 4
seconds.
Turn the power on.
Press the [5] [9] and [R] button
simultaneously for five seconds,
then [70 RET] is displayed on FL.
[
]
Press the [
] or
button to
select until [81 AIG] is displayed on
FL.
Press the [OK] button .
*The command is transmitted by
attached remote control.
NOTE1:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 4 seconds.
on the
on the
Advertisement
Table of Contents
