Xhci Mode; Audio Controller - Gigabyte GA-X99-UD4 User Manual

& SATA Device Type
Allows you to select the type of the device connected to the SATA port. (Default: Hard Disk Drive)
& XHCI Mode
Allows you to determine the operating mode for the xHCI controller in OS.
Smart Auto This mode is available only when the BIOS supports the xHCI controller in the pre-boot
environment. This mode is similar to Auto, but it adds the capability to route the ports
to xHCI or EHCI according to setting used in previous boots (for non-G3 boot) in the
pre-boot environment. This allows the use of USB 3.0 devices prior to OS boot. xHCI
controller enabling and rerouting should follow the steps in Auto, when previous boot
routs ports to EHCI. Note: This is the recommended mode when BIOS has xHCI pre-
boot support. (Default)
BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to
Auto
provide an option to enable the xHCI controller and reroute the sharable ports. Note:
This is the recommended mode when BIOS does NOT have xHCI pre-boot support.
All shared ports are eventually routed to the xHCI controller during the BIOS boot process.
Enabled
If BIOS does not have pre-boot support for the xHCI controller, it should initially route
the sharable ports to the EHCI controller and then prior to OS boot it should route the
ports to xHCI controller. Note: OS has to provide support for the xHCI controller in this
mode. If the OS does not provide support, all sharable ports won't work.
The USB 3.0 ports are routed to the EHCI controller and the xHCI controller is turned
Disabled
off. All USB 3.0 devices function as High Speed devices regardless of xHCI software
support/availability.
Allows you to determine whether to rout the USB 3.0 ports to the xHCI or EHCI controller
Manual
before booting to OS, and also provides you with options to manually rout each USB
3.0/2.0 port to xHCI or EHCI.
& Audio Controller
Enables or disables the onboard audio function. (Default: Auto)
& PCH DMI ASPM
Allows you to configure the ASPM mode for Chipset DMI link. (Default: Enabled)
& PCH Internal LAN
Enables or disables the Intel
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Wake on LAN
Enables or disables the wake on LAN function. (Default: Enabled)
& Intel VT for Directed I/O (VT-d)
Enables or disables Intel
®
& Execute Disable Bit
(Note)
Enables or disables Intel
computer, reducing exposure to viruses and malicious buffer overflow attacks when working with its
supporting software and system. (Default: Enabled)
(Note) This item is present only when you install a CPU that supports this feature. For more information about
Intel CPUs' unique features, please visit Intel's website.
®
BIOS Setup
GbE LAN function. (Default: Enabled)
®
(Note)
Virtualization Technology for Directed I/O. (Default: Enabled)
Execute Disable Bit function. This function may enhance protection for the
®
- 62 -