Gigabyte GA-X99-UD4 User Manual page 11

Storage Interface Š Chipset:
- 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes
only
(An operating system installed on the SATA3 0~5 ports cannot be used on the
sSATA3 0~3 ports.)
USB Chipset:
Š
- 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Chipset + Renesas
Š
- 4 x USB 3.0/2.0 ports on the back panel
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
1 x PCIe power connector
Š
1 x I/O shield audio LED power connector
Š
1 x heatsink LED power connector
Š
1 x M.2 Socket 3 connector
Š
1 x SATA Express connector
Š
10 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
1 x water cooling fan header (CPU_OPT)
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x USB 3.0/2.0 header
Š
2 x USB 2.0/1.1 headers
Š
1 x Trusted Platform Module (TPM) header
Š
1 x Thunderbolt add-in card connector
Š
1 x Clear CMOS jumper
Š
Back Panel 1 x PS/2 keyboard port
Š
Connectors 1 x PS/2 mouse port
Š
6 x USB 3.0/2.0 ports
Š
4 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
1 x optical S/PDIF Out connector
Š
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Š
Line Out, Mic In)
2 x Wi-Fi antenna connector holes
Š
I/O Controller iTE I/O Controller Chip
Š ®
uPD720210 USB 3.0 Hub:
®
- 11 - Hardware Installation