Table of Contents
Advertisement
SEVERAL SYMBOLS, INSIDE THE TYPICAL TRIANGLE SHOWING
DANGER, HAVE BEEN PRINTED ON SEVERAL TRANSMITTER
PARTS. ATTENTION SHOULD BE PAID, BECAUSE THERE COULD BE
THE DANGER DUE TO HOT SURFACES, ELECTRIC VOLTAGE
HIGHER THAN 50VOLT OR OTHER SPECIFIED DANGERS.
Certain devices (for example the RF final circuits mosfets) contain Beryllium Oxide BeO; these
components must not be broken, crashed or heated. This oxide passes through the common systems
of filtering, including the respiratory apparatus. The prolonged inhalation at high degrees causes
poisoning with respiratory apparatus paralysis, till death.
ALL THE MODULES CONTAINING BeO ARE MARKED WITH THE
TRIANGULAR WARNING SYMBOL INDICATING THE NOTICE:
WARNING !
The staff in charge, besides being technically qualified, must have a practice of the first aid in case
of emergency or accident (reanimation, heart massage, mouth to mouth respiration, etc.).
Before going on with the operations to be performed, it is necessary to know the position of the
general electric switch and the one of the extinguishers, which are to be used very quickly if
necessary.
WARNING
WARNING
TOXIC HAZARD
THESE DEVICES CONTAIN BERYLLIUM OXIDE
OBSERVE SAFETY INSTRUCTIONS !
Pag. 7
A07B500S manual
Advertisement
Table of Contents
