Cleaning The Charger - Toshiba e-studio306LP Quick Start Manual

Chapter  MAINTENANCE

Cleaning the charger

If the inside of the charger is dirty, the dirt will be transferred to the copied image. Clean the charger following the
procedure below.
1
Open the front cover.
2
Holding the knob provided for cleaning, pull out
the knob carefully until it comes to a stop. Then
return the knob to the original position. Repeat
this procedure several times.
When department management and user management are not used, the template in the public template group and the total
print counter in the equipment are displayed.
8
3
Close the front cover.