Storing Phone Numbers - Commodore 1650 User Manual

STORING PHONE NUMBERS

Storing phone numbers for auto-dialing is simple.
20, you can store up to five numbers with
you are using a Commodore
maximum of 30 digits each. Just follow these steps to SAVE phone numbers:
1. LOAD the TERM 64 program and wait for the READY prompt.
2. Key in LIST to display the phone number storage screen.
includes five PRINT statements (lines 20 - 50), each of which can hold
one phone number with a maximum of 30 digits.
3. Move the cursor to the first * in the PRINT statement at line 20.
4. Enter the number.
# in the number sequence.
interrupts your dialing sequence.
you are using requires you to dial a 9 to get an outside line, and then
gives you a dial tone before you can dial the number, key in the number
like this: 9P2221234.
in the number.
5. Repeat this sequence
moving the cursor to
number.
6. SAVE the phone number program to tape or disk so you can reuse the
numbers when you want to
cassette for SAVEing
or disk.
AUTCMODEM
64, you can store
You cannot include either of these two symbols: * or
Include a P (for Pause)
Be sure to press the RETURN key after you key
for up to four other numbers
the first * in the next line before keying in the
auto-dial. Do NOT use the TERM 64/VICTERM I
the numbers.
If you
a maximum of 30 digits each.
up to
For example, if the
Instead, store them on another tape
are using a VIC
ten numbers with a
This screen
if a dial tone
phone system
you want to store,
ESge 10
If