Engine Electrical
Item
1
Relay, Generator Control
2
Generator, Modified with Battery Harness – 24 Volt
3
Harness, Generator
4
Strap, Wiring Harness
5
Grommet
Ⓐ
Push 24V terminal for voltmeter and wire through bulkhead grommet and route to voltmeter.
Ⓑ
12V Ignition from UBEC (Pin A4) to control relay.
Ⓒ
Harness clip attached to UBEC.
Ⓓ
Negative battery terminal for (POS) 12V internal reference of 24V generator.
Ⓔ
Positive battery terminal for 24V battery source.
Ⓕ
24V output from rear of generator.
Ⓖ
Fuses for 24V supply to cab and trailer.
Ⓗ
Remove existing harness from driver's side generator and cut off connector and loose connector shipped
with ANB79234, then reconnect to ANB79234 at location shown.
Ⓘ
Wiring harness strap 24V connector for cab future use.
Ⓙ
Connector for 24V to trailer harness.
Ⓚ
Secure harness at various places.
24V Generator
Parts Description
Engine Electrical 04-3
Part No.
12193603
TX017797
ANB79234
12355066
AV4431
2005 GM Defense LSSV Military Truck Parts Manual
# Required
1
1
1
9
1