Searching Using The Index Function; Adjusting The Picture - Sony RMT-V405 Service Manual

QQ
3 7 63 1515 0
Selecting the sound during Hi-fi playback
Press AUDIO MONITOR to select the sound you want.
To listen to On-screen display
Stereo STEREO
Left channel LCH
Right channel RCH
Mix sound* MIX
Mono sound MONO
* The mixed sound of left and right channels, and the normal mono audio track
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded
onto the main track along with the picture. Monaural sound is recorded onto
the normal audio track along the edge of the tape.
Stereo
Usually mixed
left/right channels
Normal audio track
(monaural)
Hi-fi audio track
(main track)
Stereo sound
(left/right channels)
Notes
• To listen to playback sounds in stereo, you must use the Scart or AUDIO OUT
connections.
• When you play a tape recorded in monaural, the sound is heard in monaural
regardless of the AUDIO MONITOR setting.
TE
L 13942296513
Recording stereo and bilingual programmes (not available on SLV-SE240G/I)
Notes
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the programme position
during recording pause.
• When you press . (index search), if there is nothing recorded before the
selected index signal, playback may not start exactly at the index signal.
www
.
Searching using the index function (not available on SLV-SE240G/I)
http://www.xiaoyu163.com
Display window
STEREO
STEREO
STEREO
STEREO
No indicator
Bilingual
Usually main sound
Main (left channel)
Sub (right channel)
61
x ao u163
y
i
63
http://www.xiaoyu163.com
2 9
8

Searching using the index function

(not available on SLV-SE240G/I)
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
To find a specific recording by scanning (Index scan)
1
Insert an indexed tape into the VCR.
Press ./> (index search). The
2
VCR starts scanning each recording for
five seconds in the corresponding
direction.
3 Press H (play) to start playback when you find the desired point.
To search a specific recording (Index search)
1 Insert an indexed tape into the VCR.
Press ./> (index search) twice.
2
• To search ahead, press > (index
search) twice.
• To search backwards, press . (index
search) twice.
3 Press ./> (index search) depending on the direction where your
desired programme is located.
Each time you press the button, the number increases or decreases up to
±20, respectively.
4
The VCR starts searching, and playback starts automatically from that
point.
To stop searching
Press x (stop).
Q Q
3 6 7 1 3
62 Searching using the index function (not available on SLV-SE240G/I)

Adjusting the picture

Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
During playback, press PROGRAM +/– on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons. To resume automatic
tracking adjustments, eject the tape and re-
insert it.
Adjusting the picture sharpness (Smart trilogic)
You can automatically adjust the sharpness of the picture.
1 During playback, press MENU, then press M/m/</, to highlight
USER SET and press OK.
2 Press M/m to highlight SMART
TRILOGIC, then press ,.
3 Press M/m to set SMART TRILOGIC to
ON or OFF.
• ON: Picture sharpness is automatically
adjusted.
• OFF: Adjust the picture sharpness
manually.
To soften the picture, press <.
To sharpen the picture, press ,.
4 Press MENU to return to the original screen.
.
64 Adjusting the picture
1-14
9 4 2 8
B B
INDEX SCAN :
INDEX SEARCH : B B + 0 2
1 5 0 5 8 2 9 9 4
TRACKING – – – – – – – – – – – –
Tracking meter
OSD : ON
TAPE SELECT : E 1 8
COLOUR SYSTEM : AUTO
FORMAT 1 6 : 9 : AUTO
NICAM : ON
POWER SAVE : OFF
SMART TRILOGIC : ON
SELECT : SET :
END : OK EXIT :
PICTURE
SMART TRILOGIC : OFF
SOFTEN SHARPEN
– – – – – – – – – – – – – – – – – – – – –
ON/OFF : SET :
m
END : OK EXIT :
co
9 9
2 8 9 9
0
MENU
MENU