Honda Civic Coupe 2000 Owner's Manual page 209

Lights
4. Turn on the parking lights and
check that the new bulb is
working.
5. Reinstall the socket. Turn it clock-
wise until it locks.
6. Put the license light assembly in
place. Reinstall the two screws and
tighten them securely.
Maintenance
Replacing an Interior Light Bulb
(U.S.: EX, Si, Canada: Si, SiR)
INTERIOR LIGHT
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
(U.S.: DX, HX, Canada: DX)
INTERIOR LIGHT
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.