JVC DLA-M4000LU Operating Instructions Manual page 15

Basic Operations (Cont.)
To display the SETTING menu
The setting menu is used to make basic adjustments and settings
(TRACKING, PHASE, H. POS., V. POS., FOCUS and ZOOM) of
Projector's button
the video picture being projected after installation (connection) or
after inputs are switched. For operating the setting menu, refer to
"Making Basic Settings" on page 30.
• Press the projector's SETTING button.
TEMP
EMERGENCY AV RGB SETTING QUICK
ALIGN.
SETTING button
To display the MAIN menu
The main menu is used to adjust or set the projected video picture
and the projector's condition, etc. (PIXEL CLOCK, POSITION,
PICTURE, OPTIONS, SOURCE DECODER and LANGUAGE). For
operating the main menu, refer to pages 33 to 58.
• Press the remote control's MENU/ENTER button.
Remote control unit
QUICK
ALIGN. OPERATE
AV HIDE
PRESET PAGE BACK
PRESET button
Note
• To change the menu language displayed
English is set when the projector is shipped from the factory. The language
displayed can be selected from the following six languages:
MENU/ENTER button
(Japanese), ENGLISH, DEUTSCH (German), ESPAÑOL (Spanish),
ITALIANO (Italian), and FRANÇAIS (French). However, some words such
as "QUICK ALIGNMENT" are displayed only in English. Pronouns such as
AV RGB/COMPUTER
line display and source display are similarly treated.
+
To clear the main menu
U T
SHIFT ZOOM FOCUS
Use the PAGE BACK button to clear the main menu.
–
D W
LENS For how to operate the PAGE BACK button, see pages 33 to 58.
• While the main menu is displayed, press PAGE BACK on
28
The setting menu is displayed on the screen.
Remote control unit
SETTING
The main menu appears on the screen.
Remote control unit
the remote control.
The main menu will disappear.
Remote control unit
PAGE BACK
Basic Operations (Cont.)
To display "CHANNEL" on the screen
While no menu is displayed, pressing the PAGE BACK button
causes the channel now being used to appear.
Remote control unit
You can also switch channels. For details, refer to "Switching
AV HIDE button Channels with a Direct Channel" on page 52.
QUICK
ALIGN. OPERATE
AV HIDE
• While no menu is displayed, press PAGE BACK on the remote
PRESET PAGE BACK
PAGE BACK button
PRESET button
AV RGB/COMPUTER
+
U T
SHIFT ZOOM FOCUS
To temporarily erase video image
–
D W
LENS
Press the AV HIDE button, and video image will temporarily
disappear from the screen. Pressing the button again will resume
the video image.
• Press AV HIDE on the remote control.
To use the remote control's PRESET button
The PRESET button is used for adjustments made on the main
menu or setting menu.
• When resetting only the selected settings to the factory-set
Notes
• This button works only for numeric values. It does not work for switching
between ON and OFF.
• For items such as PIXEL CLOCK (TRACKING and PHASE), POSITION (H.
POS. and V. POS.), both settings are reset at the same time.
control.
The channel appears on the screen.
Remote control unit
PAGE BACK
Video image temporarily disappears from the screen.
Remote control unit
AV HIDE
values, press the remote control's PRESET button.
Only the selected item's setting is reset to the factory-set value.
Remote control unit
PRESET
29