Sanyo PLC-XF40 Service Manual page 43

■ Integrator-lens-in adjustment-2
SCREW-A
SCREW-B
SCREW-A
Before Adjustment :
1. Remove the flexible cables of LCD panels from the assembly Main. And turn on the projector.
2. Insert light block sheets in front of the Red and Blue panels to block the red and blue lights so that green light is project-
ed.
3. If the shade appears on the top or bottom of the screen, adjust in the following procedure.
Adjustment :
1. Loosen two screws-A.
2. Insert a ball allen wrench into screw-B, turn it and erase shade.
3. Tighten the two screws A to fix the integrator lens-in unit.
-46-