Sanyo PLC-XF40 Service Manual page 16

Multimedia projector
Hide thumbs Also See for PLC-XF40:
Table of Contents

Advertisement

5.
Prism / LCD panel assembly removal.
Note :
Prism / LCD panel assembly is a precision part. be sure to
handle this part with special attention. Do not drop it or give
it excessive force. It may damage the parts and alignment.
Prism / LCD panel assembly
Remove 4 screws and remove the prism / LCD panel assembly.
At the time, be careful not to damage the prism / LCD panel assembly with the driver.
Caution :
(1). Never touch the LCD panel and prism part directly with
hand. Otherwise the optical parts may get dirty.
(2). Since the LCD panel is equipped with CMOS-LSI, pay atten-
tion to static electricity.
And never touch the electrode of flexible cables.
(3). Don't disassemble prism / LCD panel assembly, otherwise it
can be damaged.
Never touch
the electrode of flexible cables.
-15-

Advertisement

Table of Contents
loading

Table of Contents