Table of Contents
Advertisement
To Adjust Lift Cap Up
Combustion
To Lock Push Cap Down
Chamber
Flame
Burner
Fuel Regulator
Back Side of Burner
¾ Length of
Combustion
Chamber
Figure 8 – Flame Adjustment
Figure 9 – Fuel Regulator
MAINTENANCE SCHEDULE
WEEKLY
--- Drain water from storage tank.
MONTHLY
--- clean stainless filter screen in filter (figure 14) periodically and drain off any water
accumulation. Monitor : every application is different and may vary depending on contamination
of oils being used.
ONCE EACH SEASON
(OR MORE DEPENDING UPON USAGE OR CONTAMINATION OF OIL).
--- Clean flame cone. (figure 6).
--- Remove ash deposits from combustion chamber by opening front panel to gain access to
ash/drip pan inside combustion chamber. (figure 15).
--- Clean pump strainer. Remove pump cover for access. (figure 13). CAUTION!-Be careful of
gasket.
--- Clean air compressor filter element (figure 5).
YEARLY
--- Inspect electrode adjustment. (figure 11). Due to erosion, adjustment may change.
--- Replace nozzle every 3-5 years depending on usage (figure 6, 10). Will lose efficiency due to
erosion.
12
Operation, and Service Instructions
Advertisement
Table of Contents
