Dear music lover,
thank you for purchasing a PRO-JECT AUDIO USB Box.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
PRO-JECT is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Audio Trade GmbH
Copyright © 2008. All rights reserved.
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
Technical specifications Pro-Ject USB Box
Line-level output:
Output voltage:
A/D converter:
Sampling rate:
USB-input:
Operating systems:
Dimensions (W x H x D):
Weight:
Connection to the amplifier
Connect the Out socket to a line input (such as AUX) on your amplifier.
Make all connections whilst the USB Box is disconnected from the computer.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
2
© Audio Trade GmbH · Pro-Ject USB Box · Revision 1.2.10/1.3.10
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
1 pair RCA/Phono sockets
0,775Vrms
16-Bit Delta Sigma
44,1kHz
digital serial data protocol USB 1.1
™
Windows
und Mac OS
103 x 38 x 141mm
540g
™
Need help?
Do you have a question about the usb box and is the answer not in the manual?
Questions and answers