Table of Contents
Advertisement
(16) Cover-open switch replacement
Removal
1. Remove the subassembly of the sensor board and the high-voltage power supply board. (See Item (9)
High-voltage power supply board and sensor board replacement.)
2.
Disconnect the connector from the cover-open switch.
3. Disengage the two claws of the left guide (for the print unit) and pull the left guide out in an upward
direction to remove it.
4. Remove the cover-open switch.
Hooks
Installation
Reverse the removal procedure.
4 - 3 6
Cover-open switch
Advertisement
Table of Contents
