1. Remove the four lock screws from the stand, and detach the stand.
2. Remove the terminal covers (large and small).
3. Remove the two terminal screws.
4. Remove the eight lock screws from the cabinet B.
5. With the card eject button held down, open the cabinet in order of
the cabinet B by sliding it toward the PC card slot.
6. Remove the wire holder and tape, and disconnect the connecting cable.
7. Disconnect all the connectors from all the PWBs.
PC Card Slot
Terminal Cover (S)
4
2
Cabinet B
1
Stand
REMOVING OF MAJOR PARTS
5-4
5-3
5-2
5-6
3
5-5
Card LED PWB
7
7
6
Tape
R/C, LED PWB
5-1
5-6
thru
5-1
Cabinet A
5
2
Terminal Cover (L)
Main PWB
7
7
7
7
7
7
6
Wire Holder
9
LC-15PX1U
, and detach
Operation PWB
Inverter PWB
7
7
Analog PWB
6
Tape