General - Sony KDL-26P2520 Service Manual

1: Checking the
accessories
Remote RM-ED007 (1)
Size AA batteries (R6 type) (2)
Cable holder (1) (only for KDL-40U25xx)
Support belt (1) and screws (2)
To insert batteries into the remote
Notes
• Observe the correct polarity when inserting batteries.
• Dispose of batteries in an environmentally friendly way.
Certain regions may regulate disposal of the battery.
Please consult your local authority.
• Do not use different types of batteries together or mix old
and new batteries.
• Handle the remote with care. Do not drop or step on it, or
spill liquid of any kind onto it.
• Do not place the remote in a location near a heat source, or
in a place subject to direct sunlight, or in a damp room.
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
2: Connecting an aerial/
VCR
Connecting an aerial only
Coaxial cable (not supplied)
Connecting an aerial and VCR
Scart lead (not supplied)
RF lead
(not supplied)
VCR
3: Bundling the cables
(only for KDL-40U25xx)
4: Preventing the TV
from toppling over
2
3
1
5: Selecting the language
and country/region
1
2
2
3,4
1
Connect the TV to your mains socket
(220-240V AC, 50Hz).
2
Press 1 on the TV (top side).
When you switch on the TV for the first time, the
Language menu appears on the screen.
1
When the TV is in standby mode (the (standby)
indicator on the TV (front) is red), press "/1 on
the remote to switch on the TV.