Table of Contents
Advertisement
A
E
C
C
D
D
C
C
C
D
D
D
D
D
C
D
C
GX4
GX4
Adjustable foot.
Adjustable foot.
A
Assembly fan
A
FN909
C
C
C
C
E
E
E
E
E
E
E
A
A
B
B
B
C
B
B
B
A
B
A
B
B
F
F
F
F
F
F
7.
z
A
B
B
B
B
1. Remove 4 screws A and remove the fan FN909 and remove the
fan FN910.
2. Remove 4 screws B and remove the assembly fan.
3. Remove 4 screws C and remove the fan FN906.
8.
Fans(FN903, FN904, FN905, FN907 and FN908),
AC SW unit, Handle and Adjustable feet removal.
A
Caution :
(1).Don't mistake a cooling fan's attachment direction in the case of a re-
assembly. (Refer to the arrow in a figure.) If the attachment direc-
tion is mistaken, it will become the cause which the inside of the pro-
jector is unusually overheated and a fire or parts damage.
(2).Mark the Fans as they are removed from the cabinet bottom so that they
may be reassembled in the same location from which they were removed.
1. Remove 5 screws A and remove the duct for FN907 and remove the Fan (FN907).
2. Remove 9 screws B and remove the Fans (FN903 and FN904) and remove the duct
for FN903/4.
3. Remove 8 screws C and remove the holder for FN908 and remove the Fan
(FN908).
4. Remove 8 screws D and remove the holder for FN905 and remove the Fan
(FN905) and remove the duct for FN905.
5. Remove 8 screws E and remove the AC switch unit.
6. Remove 4 screws F and remove 2 pins F and remove the handle.
7. Remove 8 screws G and remove the adjustable feet.
-12-
Fans(FN906, FN909 and FN910)
removal.
The following caution is the important
matter for maintaining the safety of a
Caution :
product.
Don't mistake a cooling fan's attachment direction in the
case of a re-assembly. (Refer to the arrow in a figure.) If
the attachment direction is mistaken, it will become the
cause which the inside of the projector is unusually over-
heated and a fire or parts damage.
The following caution is the important
matter for maintaining the safety of a
product.
Advertisement
Table of Contents
