Things You Need To Get Started; Controller Setup - Leupold RCX Trail Camera System User Manual

Things you need to get started

1. Camera
2. Controller
(included in RCX Kit. Li-Ion
battery included)
3. 8 AA Batteries
(Leupold strongly
recommends Energizer ® Ultimate Lithium
AA batteries, especially for use in below
freezing temperatures.)*
4. 2 SD or SDHC cards: one for the
controller, one for the camera, up to
32GB capacity.
Accessories:
5. Mounting strap
(comes with camera
or kit)
6. USB Cable
(included with kits and with
controllers)
4
7. Stand offs
(Included with cameras and
kits. These are used to solidly position
the camera on uneven surfaces)
RCX Lockdown Security Plate
Optional:
(Comes installed on RCX-2 only; for use with
Master Lock® Python™ cable or for mounting
with a single nail. Available separately for
RCX-1.)
*Alkaline batteries can leak and damage
the camera if left unattended for extended
periods, especially during below freezing
temperatures. The RCX Trail Camera Warranty
does not cover damage from battery leakage.
Controller Set-Up
Lanyard Hole Mini USB Port Cover
Battery Door
Battery Door
Screw
3" TFT (Thin Film Transistor) Screen
Power Button
SD Card Slot Door
5