Advertisement
Table of Contents
- 1 Table of Contents
- 2 Things You Need to Get Started
- 3 Controller Setup
- 4 Camera Setup
- 5 Battery Guideline
- 6 Camera Operation Setup
- 7 Camera Setup with Preset Modes
- 8 DST (Dual Sensor Technology)
- 9 Camera Mounting
- 10 Custom Camera Setup
- 11 Using an External Power Source
- 12 Downloading Images
- 13 Troubleshooting
- Download this manual
Advertisement
Table of Contents
Related Manuals for Leupold RCX Trail Camera System
Summary of Contents for Leupold RCX Trail Camera System
- Page 1 USER MANUAL...
-
Page 2: Table Of Contents
Introduction menu selections. You are then able to view the images right there in the field The RCX Trail Camera System is Introduction ......................3 and make any changes to the setup you designed to support the use of many Things you need to get started ................ -
Page 3: Things You Need To Get Started
RCX Lockdown Security Plate Optional: 3. 8 AA Batteries Battery Door (Leupold strongly (Comes installed on RCX-2 only; for use with recommends Energizer ® Ultimate Lithium Master Lock® Python™ cable or for mounting AA batteries, especially for use in below with a single nail. - Page 4 A controller must only be set once, but The Lithium Ion battery is already Navigate through the controller is necessary to set the date and time, installed in the controller. The menus by arrowing to the desired and to access the features of your RCX controller battery should be charged selection.
- Page 5 Brightness: The display brightness of BOTTOM ACCESS the controller can be adjusted. This is DOOR CLOSED 1/4-20 Tripod recommended when lighting conditions Stud Mount Cover Retaining change dramatically. Screw USB Port Cover 12V Jack Cover Time/Date: Time is in 24-hour time only.
-
Page 6: Camera Setup
5. Turn power on (“I” position). The freezing temperatures, and high camera won’t take pictures for 30 power drain applications, regardless Camera Status seconds after powered on or with of what device they are used in. the USB cable still connected to • Never mix battery types (Alkaline, both the controller and the camera. -
Page 7: Camera Operation Setup
Camera Operation Setup Camera Setup with Preset Modes If you are using multiple RCX Cameras, Press to select “Camera Name”, 1. Go to Camera Setup 3. Select from the 4 preset modes the it is recommended to give each camera then press setting that is closest to what you 2. -
Page 8: Dst (Dual Sensor Technology)
DST (Dual Sensor Technology) Camera Mounting Select a place to hang the camera. is not coming straight toward the MAXIMUM TRIGGER RANGES (usually a tree). Avoid or remove any camera, since the PIR sensors obstructions. work by comparing changes in 54°... - Page 9 10. Select the “Preview Camera” in the small hole above the Leupold the area, power the camera off and on Icon (the red deer) from the main medallion on the front left side the...
-
Page 10: Custom Camera Setup
Custom Camera Setup Manual: Super high, high, medium range and the 45° sensor provides a more forgiving wide sensor angle that and low. Video: 320x240* or 640x480 Use the custom mode to refine settings. nearly covers the 54° field of view of • Set to super high sensitivity for Night &... -
Page 11: Using An External Power Source
Event Delay and to avoid triggers during periods these night shots only. For ease of where there is a lot of activity that you operation, some settings cannot be The Event Delay feature sets the camera Picture Stamp don’t want to capture. For example, customized separately for night shots. -
Page 12: Downloading Images
camera by opening the rubber sealed count of how many images there are to Viewing Images on a TV 12V jack cover. Be sure to connect the download and the percent complete. If Plug the USB cable into a TV or any red clamp to the positive (+) terminal it appears downloading is going to take other device with a USB port that... -
Page 13: Troubleshooting
Troubleshooting The controller does not recognize the camera when the USB cable is plugged in. The camera is not taking pictures or is only taking pictures some of the 1. Verify that the camera is powered on. “I” is the “On” position of the switch. time. - Page 14 48 LED setting in the RCX-2. is located on the front of the camera, on the left side, just above the Leupold 2. When batteries get very low, The RCX Trail Camera is designed to take only day medallion.
- Page 15 The warranty is given solely to the original owner and is not transferable. Leupold & Stevens, Inc. requires that after 30 days of purchase, any customer returns of RCX Trail Cameras or Camera Components (other than those still in sealed factory packaging) be sent directly to Leupold &...
- Page 17 Leupold & Stevens, Inc. 1-800-LEUPOLD » 503-526-1400 » www.leupold.com PO Box 688, Beaverton, OR 97075-0688 14400 NW Greenbrier Parkway, Beaverton, OR 97006-5790 USA Part# 112161 Artwork#112163B...
Need help?
Do you have a question about the RCX Trail Camera System and is the answer not in the manual?
Questions and answers