Configuring A Fireball Server; Configuring A Fireball Client - Escient FireBall MP-200 User Manual

FIREBALL CLIENT SERVER INSTALLATION GUIDE WD008-1-3
3/8/2006

Configuring a FireBall Server

Every FireBall capable of server functions is automatically enabled to serve digital audio
streams whenever it is plugged in and properly configured for your network.
It is recommended that you give each of your FireBall servers a unique name that describes
it's location using the FireBall Name screen which can usually be accessed from
Setup/Network/Server Settings. Names like "Living Room", "Home Theater", "My Music
Server", and "MyFireBall" are all good examples.

Configuring a FireBall Client

Networking
Each FireBall client must be on the same network as the server. This document will assume
that you have properly connected your FireBall client to the same network as your FireBall
server.
Please refer to the HomeNetworkingPrimer support document on the Escient web site for
more information about home networking.
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com