Sharp MD-M3 Service Manual page 75

To have your order filled promptly and correctly, please furnish the
following information.
1. MODEL NUMBER
3. PART NO.
MARK: SPARE PARTS-DELIVERY SECTION
Explanation of capacitors/resistors parts codes
Capacitors
VCC ....................... Ceramic type
VCK ........................ Ceramic type
VCT ........................ Semiconductor type
VC • • MF ............... Cylindrical type (without lead wire)
VC • • MN ............... Cylindrical type (without lead wire)
VC • • TV ................ Square type (without lead wire)
VC • • TQ ............... Square type (without lead wire)
VC • • CY ............... Square type (without lead wire)
VC • • CZ ............... Square type (without lead wire)
VC • • • • • • • • • J .. The 13th character represents capacity difference.
("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%,
"C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.)
If there are no indications for the electrolytic capacitors, error is ±20%.
"CAUTION:
For continued protection against risk of fire, replace only with same type F995:4A/125V, F996, F997:3.15A/125V,
F998:800mA/125V, F999:1.6A/125V fuse."
NOTE:
Parts marked with " " are important for maintaining the safety of the set.
Be sure to replace parts with specified ones for maintaining the safety and performance of the set.
PARTS GUIDE
"HOW TO ORDER REPLACEMENT PARTS"
2. REF. No.
4. DESCRIPTION
– 75 –
MODEL
MD-M3 MD micro System consisting of
MD-M3(main unit) and CP-M3(speaker
system).
MODEL
MD-M1 MD micro System consisting of
MD-M1(main unit) and CP-M1(speaker
system).
For U.S.A. only
Contact your nearest SHARP Parts Distributor to order.
For location of SHARP Parts Distributor,
Please call Toll-Free;
1-800-BE-SHARP
Resistors
VRD ....................... Carbon-film type
VRS ........................ Carbon-film type
VRN ....................... Metal-film type
VR • • MF ............... Cylindrical type (without lead wire)
VR • • MN ............... Cylindrical type (without lead wire)
VR • • TV ................ Square type (without lead wire)
VR • • TQ ............... Square type (without lead wire)
VR • • CY ............... Square type (without lead wire)
VR • • CZ ............... Square type (without lead wire)
VR • • • • • • • • • J .. The 13th character represents error.
("J" ±5%, "F" ±1%, "D" ±0.5%.)
If there are no indications for other parts, the resistors are ±5%
carbon-film type.
MD-M3/D1
MD-M3
MD-M1