Note:
Method B (if your wireless client device has a WPS button)
a. Press the WPS button on the wireless client.
b. Press and hold the Security button on the wireless
access point for about 2 seconds and release it. The
Wireless LED starts flashing.
When the Wireless LED stops flashing, the wireless
pairing is done and the wireless device is securely
connected to the XWN5001 WiFi Access Point.
Note:
You can access advanced wireless
settings by clicking the IP address at
the bottom of the Wireless Setting
screen. The login and password are
admin and password.
This method pairs the XWN5001 with
your wireless client, and at the same
time secures the connection with a
random passphrase.
11