Brickhouse Security Mini recorder User Manual page 10

To Enable Sound-Activated Recording
When the Mini Recorder is powered on, push the mode button
and Sound Activation Recording will be enabled. When device
detects sounds higher than 60 decibels, it will begin recording.
When the device is recording, the blue LED light will glow and
stay steady with a flashing purple LED light. To stop recording,
push the record button twice. The flashing purple LED light will
disappear leaving just the blue steady glow indicating that the
device has stopped recording and has returned to standby.
When Sound Activation Recording is enabled, the Mini Re-
corder will record in 2 Minute Segments. After 2 minutes, if
there is no more sound, the Mini Recorder will stop and save
the recording. If there is still sound, the Mini Recorder will
continue to record.
BrickHouse Security User's Guide Page 9