Factory Mode Introduction - ViewSonic VS11444 Service Manual

Activate Power Lock
Deactivate Power Lock
NOTICE:
Status bar indicating Power Button lock or unlock is in progress and when complete it will indicate
"Power Button Locked"
Power should only be lockable in the "On State"
5.3.4 Resolution notice function
Item
Activate Resolution
Notice Menu
Deactivate
Resolution Notice Menu

5.3.5 Factory Mode Introduction

When input the signal, press "power key" to turn off the monitor. Press" [▼] +[▲] +[ ] "at the same time so
as to enter factory mode. After power on, press ''Menu[1]'' key, you can see the Factory menu.
INL-V0
V3 060922
Auto Color
Color Temperature : The R, G, B of 9300K and 6500K and 5400K and User Mode
5.4 Burn-in pattern
If it is a new monitor, and in factory mode, if no VGA signal input, Burn-in pattern will self generate
automatically. Burn in patterns are: full Red, Green, Blue, White and Black. You can not escape from
Burn-in pattern until plug in VGA Cable or press the power key to turn the monitor off and then turn it on.
5.5 Auto Color (Automatically calibrate chip ADC parameter by using chip
ViewSonic Corporation
[1] + [▼] 10S
[1] + [▼] 10S(again)
Resolution Notice Menu
Resolution Notice OSD should show
on screen
non-native mode for 30 sec,
And it should disappear after 10s
or by pushing button [1] or [2]
Push button [2] under Resolution
Notice OSD, select Disable
: Currently using panel model name
: Currently using firmware version information.
: Automatically calibrate chip ADC parameter by using chip internal DAC
Colors are all generated from scaling back end.
Method
after changing to
Confidential - Do Not Copy
37
Can not turn off the LCD;
Press the power button will
appear "Power Button Locked"
OSD 3s;
LCD would automatically turn
back "On" when power is restored
after a power failure
Phenomenon
------
-------
VX1945wm-3