ViewSonic VS11444 Service Manual page 16

further use
2. It should be reset by Memory Recall function(Should not reset by power off, power unplug and
others)
OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times out. There
shall not be a separate save
Factory Defaults
Item
Contrast
Brightness
Color Temperature
Sharpness
OSD H. Position
OSD V. Position
OSD Time Out
OSD Background
2.7 AUDIO INTERFACE (SPEAKER SPECIFICATION)
Line input signal
Line input impedance
Maximum Amp power output (Watt)
Speaker Power rating(Ω/Watt)
THD
Signal to Noise Ratio
Frequency response
SPL.
Line input connection
Vibration
Screen image
Connector PC99 requirement Audio in
Cable type / length
Audio DPMS
ViewSonic Corporation
Defaults
70%
100% Resolution Notice
6500K
100%
50%
50%
15 Sec
Enabled
1 Vrms
10 kOhm
2.0 W (RL=8Ω)
8Ω/2 W (typ.) ; 8Ω/ 3 W (max)
10%
75 dB
200 Hz – 20 Khz
82 ± 3 dB
3.5 mm stereo jacks
There should be no audible vibration resonance at
volume=100% & treble / bass in def. value
There should be no affect on the screen image
stability under any conditions
Lime Green pantone # 577C
3.5mm stereo cable / 1.8m length
Speakers stay Off when the rest of the monitor is in
power saving
Note: There is no guarantee <2 W at power
consumption in Active Off mode, when the Audio
Cable is connected
13
Item
Input Priority
Volume
Balance
Treble
Bass
(Maxmum output @ 1KHZ)
Confidential - Do Not Copy
Defaults
N/A
Enabled
N/A
N/A
N/A
N/A
VX1945wm-3