Advertisement
AN3012DAB Installation Guide
INTRODUCTION
This installation guide shows you how to install the glass-mount DAB Antenna in your car to
work with the in-car DAB receiver and receive digital radio transmissions.
OVERVIEW
❷
❶
Warning:
1.
Please read the Antenna Installation section carefully prior to the actual installation.
2.
This glass-mount DAB antenna is exclusively for use inside the vehicle.
3.
It is not suitable for use on reflective-coated glass.
4.
Do not bend or damage the Antenna.
5.
This DAB antenna can be installed on either side of the front windshield only.
6.
The vehicle's DAB receiver must provide a 12V phantom power to the SMB connector
for the DAB antenna (standard when used with DABmotion).
7.
Once the DAB antenna is adhered to the windshield it can not be relocated.
Please test and fit the antenna in its location before removing the adhesive
separator and permanently fixing it to the windshield. The antennas that have
been adhered in location are not valid for return and warranty claims.
➌
➍
➎
➎
➏
❶
Antenna
❷
Signal Booster
➌
Copper Strip
➍
Mini RF 1.37mm Coaxial Cable
➎
Junction Box
➏
Antenna Cable
➐
SMB Connector
➐
-1-
Advertisement
