Common Operations - JVC RD-T5RBU Instructions Manual

Connecting the AC Power Cord
Firmly insert the AC power cord supplied with the System into the AC inlet on the back of the Unit.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM IN
ORDER TO AVOID MALFUNCTION OR DAMAGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN
GOING OUT OR WHEN THE SYSTEM IS NOT IN USE FOR AN EXTEND-
ED PERIOD OF TIME.
Plug the AC power cord into the wall outlet, and your System is at your
command!

Common Operations

SNOOZE SLEEP
1 2 3
4 5 6
7 8 9
10 +10
REPEAT
CD
TUNER
BAND
FM MODE
BASS/TREBLE AHB PRO
BASS/TREBLE
VOLUME
REMOTE CONTROL RM-SRDT7
[RD-T7RGN Only]
Turning the Power On and
Standby
Turning the Unit On ————————
Press the button.
STANDBY/ON
The STANDBY indicator goes out, and the display comes on, and
"WELCOME" is displayed.
The Unit comes on ready to continue in the mode it was in when the
power was last turned off.
For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.
If you were listening to the Tuner last, the Tuner comes on play-
ing the station it was last set to.
Note: When power is supplied from the batteries, the
on the Remote Control does not work.
Turning the Unit Standby —————
Press the button again.
When operating on AC power:
STANDBY/ON
"GOOD BYE" is displayed and the display becomes blank, except
for the clock display. The STANDBY indicator lights up.
3
CLOCK/DISPLAY
STANDBY indicator
AHB PRO
VOLUME +, –
SNOOZE/DIMMER
[RD-T7RGN]
SNOOZE
[RD-T5RBU]
or
STANDBY
button
or
STANDBY
CD PORTABLE SYSTEM
STANDBY/ON
CLOCK/
DISPLAY SLEEP
STANDBY
TIMER
CD/TUNER ALARM
SNOOZE/DIMMER
PHONES
When in Standby mode, the Unit continues to a small amount of
power to run the display.
To switch off the Unit completely, unplug the AC power cord
from the AC outlet.
When power is supplied from the batteries:
When the Unit is turned off with the
button on the Remote Control is ineffective), the Standby in-
dicator lights up and the display is blank.
To switch off the Unit completely, remove the batteries from the
Unit.
Adjusting the Volume
You can adjust the volume level between MIN (0) and MAX (32)
when the Unit is turned on.
Turn the VOLUME control on the Unit to the right or left to in-
crease or decrease the volume level.
Press the VOLUME + or – button on the Remote Control to increase
or decrease the volume level.
CAUTION: DO NOT turn on the Unit and/or start
playing any source without first setting the
VOLUME control to MIN (0) , as a sudden blast of
sound can damage your hearing.
AC IN
Display
MULTIJOG
VOLUME
VOLUME control
(Jog dial)
RANDOM/ BASS/
AHB PRO REPEAT TREBLE
BASS/TREBLE
AHB PRO
[RD-T7RGN Only]
P.TUNING
CD TUNER BAND
button on the Unit (the
OR