Sony XR-1100 Service Manual page 5

Fm/am cassette car stereo
Table of Contents

Advertisement

(E and UK models)
Installation
Precautions
•Choose the installing location carefully so that the unit will not
interfere with the normal driving functions of the driver.
•Avoid installing the unit where it would be subject to high
temperatures, such as from direct sunlight or hot air from the
heater, or where it would be subject to dust, dirt or excessive
vibration.
•Use only the supplied mounting hardware for a safe and secure
installation.
Mounting angle adjustment
Adjust the mounting angle to less than 20°.
Mounting example
Installing in the dashboard
1
1
Remove the bracket.
Retire el soporte.
4
6
5
5
6
Mounting the unit in a Japanese car
You may not be able to install this unit in some makes of Japanese
cars. In such a case, consult your Sony dealer.
TOYOTA
6
max. size
ø 5 × 8 mm
Tamaño máx.
ø 5 × 8 mm
Bracket
Soporte
Note
To prevent malfunction, install only with the supplied screws 6.
Instalación
Precauciones
•Elija cuidadosamente el lugar de instalación de forma que la
unidad no impida la conducción.
•Evite instalar la unidad donde pueda quedar sometida a altas
temperaturas, como a la luz solar directa o al aire caliente de
calefacción, o a polvo, suciedad, o vibraciones excesivas.
•Para realizar una instalación segura y firme, emplee solamente la
ferretería de montaje suministrada.
Ajuste del ángulo de montaje
Ajuste el ángulo de montaje a menos de 20°.
Ejemplo de montaje
Instalación en el salpicadero
2
1
5
6
5
4
Montaje de la unidad en un automóvil
japonés
Usted no podrá instalar esta unidad en algunos automóviles
japoneses. En tal caso, consulte a su proveedor Sony.
to dashboard/center console
al salpicadero/consola central
6
max. size
ø 5 × 8 mm
Tamaño máx.
ø 5 × 8 mm
Nota
Para evitar que se produzcan fallos, realice la instalación solamente con
los tornillos suministrados 6.
3
1 8 2
m m
5 3 m
m
Bend these claws, if necessary.
Si es necesario, doble estas pestañas.
To support the unit
Sujeción de la unidad
Dashboard
Salpicadero
NISSAN
6
max. size
ø 5 × 8 mm
Tamaño máx.
ø 5 × 8 mm
Bracket
Soporte
XR-1100
Ver 1.1 2001.06
Fire wall
Panel cortafuegos
2
3
1
to dashboard/center console
al salpicadero/consola central
6
max. size
ø 5 × 8 mm
Tamaño máx.
ø 5 × 8 mm
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents