12.1.1 Repairing a flat tyre (type 4.00-8" pneumatic tyres)
Pre-requisites:
• Torx TX-40 spanner
• 5 mm Allen key
• Repair kit for tyres with inner tube or a new hose.
• Talcum powder
Removing the wheel
• Jack up the vehicle (place a piece of wood under
the frame).
• Use the Torx spanner to remove the 4
countersunk screws (1).
• Remove the wheel from the wheel hub.
PLEASE NOTE
Assembly is carried out in the reverse order. Please ensure that the wheel is re-fitted on the
same side and in the same running direction it was in before removal.
129