Panel Facilities And Specifications - Pioneer XC-F10 Service Manual

8. PANEL FACILITIES AND SPECIFICATIONS

8.1 PANEL FACILITIES
CD tuner
1 Top cover – Remove to access the antenna
terminals and auxiliary inputs
2 STANDBY/ON – Press to switch the system on
or into standby
3 VOL – – Use to reduce the volume
4 VOL + – Use to increase the volume
5 7 – Press to stop the currently playing CD
6 6 – Press to start CD playback, or pause a
disc that's already playing (press again to
restart)
7 OPEN/CLOSE – Press to open/close the disc
compartment
8 Disc compartment – The disc compartment
automatically opens when you move your hand
near
9 Standby indicator – Lights when the system is
in standby.
5
4
3
2
1
7
6
8
9
CD tuner
Display
1 2 3
CD - RW
SLEEP SYNC DIGITAL
WAKE-UP
6 7 8 9 10
1 Tuning indicator – Lights when the tuner is
tuned to a broadcast.
2 FM stereo indicator – Lights when you're
listening to an FM broadcast in stereo.
3 FM mono indicator – Lights when you're
listening to an FM broadcast in mono.
4 RDS – Lights when the tuner is an RDS mode.
5 RPT[-1] – Indicates the repeat mode (RPT for
repeat disc; RPT-1 for repeat track).
6 SLEEP– Lights when the sleep timer has been
set.
7 Record timer – Lights when the record timer
has been set for the tape deck, MD recorder or
CD-Recorder.
8 Timer set indicator – Indicates that the wake-
up and/or the record timer have been set.
9 WAKE UP – Lights when the wake up timer
has been set.
10 SYNC – Lights during automatic sync record-
ing.
11 ATT – Lights when the auxiliary input signal is
being attenuated (reduced in level).
12 PGM – Lights when a playlist has been pro-
grammed.
13 2 TAPE 3 – Indicates the play direction of the
tape .
14 RDM – Lights during random track playback.
XC-F10
4 5
RDS SKIP ON REC RPT-1
D.VOL PGM RDM
ATT
TAPE
FINALIZE
11 12 13 14
41