Main Menu
8. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting on the
jack notch.
Table of Contents
JACKING
POINT
9. Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the ground.
EXTENSION
WHEEL WRENCH
10.Remove the wheel nuts and wheel
Changing a Flat Tire
WHEEL NUTS
WHEEL COVER
cover. The wheel cover cannot be
removed without first removing
the wheel nuts. Do not attempt to
forcibly pry the wheel cover off
with a screwdriver or other tool.
Taking Care of the Unexpected
CONTINUED