Honda Del Sol 1995 Owner's Manual page 158

Main Menu
Lights
3. Remove the rubber weather seal
by pulling on the tab.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way and remove the bulb.
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place and clip the end into
the slot.
6. Push the rubber weather seal over
the bulb.
7. Push the electrical connector onto
the tabs of the new bulb.
Turn on the headlights to test the
new bulb.
8. (Passenger's side)
Reinstall the air intake tube.
Maintenance
Table of Contents
Replacing an Auxiliary Light Bulb
The auxiliary lights are located next
to the headlights.
1. Open the hood.
2. Remove the socket by turning it
one-quarter turn counterclockwise.
3. Remove the burned-out bulb from
its socket. To remove the bulb,
push it in slightly and turn it
counterclockwise.
4. Insert the new bulb in the socket.
Reinstall the socket.
5. Test the bulb by turning on the
headlights (low beam) and
auxiliary lights.