Lenovo M50-70 Hardware Maintenance Manual page 58

M50-70/M50-80 Hardware Maintenance Manual
Figure 12. Removal steps of USB board and finger print board (continued)
Remove the screw 3, then remove the USB board in the direction shown by
arrow 4.
Disconnect the fingerprint board connector in the directions shown by arrows 5
and 6. Remove the screw 7.
54
Step Screw (quantity)
M2.0 × 3.0 mm, flat-head, nylok-coated (1)
3
IO BD to Up
Step Screw (quantity)
M2.0 × 3.0 mm, flat-head, nylok-coated (1)
7
FP Brkt to Up
Color Torque
Black 1.8±0.2 kgf*cm
Color Torque
Black 1.8±0.2 kgf*cm