M50-70/M50-80 Hardware Maintenance Manual
1080 ODD board
For access, remove these FRUs in order:
• "1010 Optical drive" on page 33
• "1020 Keyboard" on page 35
• "1030 Base cover" on page 37
• "1040 Battery pack" on page 40
Figure 8. Removal steps of ODD board
Detach the ODD board connector in the directions shown by arrows 1 and 2.
Remove the screws 3.
Then remove the ODD board in the direction shown by arrow 4.
When installing: Make sure that the connector is attached firmly.
48
Step
Screw (quantity)
M2.0 × 2.0 mm, flat-head, nylok-coated (2)
3
ODD BD to Up
Color
Torque
Black
1.8±0.2 kgf*cm