Installation Requirements - GreenTech Pure Wash Owner's Manual

Installation Requirements:

Electrical Requirements:
• pureWash requires 120 Volt 60 Hz power on a 15 amp fuse or circuit breaker.
• Never use an extension cord or a power adapter other than the one provided with pureWash.
Water Requirements:
• Water pressure of 40 to 75 psi is required for pureWash to operate correctly and safely.
• To avoid the possibility of water damage (i.e. a hose leak) it is recommended that you
always turn off the water supply valves/faucets when the washing machine is not in use.
• Water quality may affect the performance of your pureWash. If you have water quality
concerns, such as high iron content, consult a water filtration expert.
• Some later model high-efficiency washing machines require water from both the cold and
hot water supplies even if a cold water cycle is selected. In this case, a Y-valve will connect
both the cold and hot water hoses from the pureWash outlet hose to the washing machine.
Location Requirements:
• Never install the pureWash in areas where water may freeze. pureWash will always
maintain some water in the unit and freezing can cause damage to internal components.
Prior to Installation:
1. Remove your pureWash from its packaging and inspect for any shipping damage.
2. Turn off the hot and cold water supplies/faucets to your washing machine.
3. Remove the cold water hose from the cold water faucet.
5