GreenTech Pure Wash Owner's Manual page 16

Get the most out of
your pureWash!
In order for your pureWash to perform
most effectively, water quality issues
must be addressed. Installing a pre-filter
is recommended to treat mild water quality
issues, as unfiltered impurities in the water
supply can potentially interact with the
oxidizers produced by pureWash thereby
hindering your pureWash's performance.
Our pre-filter is a 2-stage KDF 55 and Granular
Activated Carbon (GAC) filter. This filter covers
most water quality issues such as high chlorine
content and high iron content, but there may be
some circumstances in which additional water
treatment is needed.
Contact your water supplier, local government
office or a local water quality specialist to learn
more about your water quality. For more
information and resources on water quality, visit
water.epa.gov
To purchase a pre-filter, contact your pureWash retailer,
visit www.pureWashPreFilter.com or call 423-207-0235.
Copyright © 2010 GreenTech Environmental: All Right Reserved