Advertisement
Basic operation
STANDBY lamp
1
1
Turn on the power.
STA ND
BY
2 2
E
SO URC
Select a source.
IN
AU DIO
S
PHO NE
Headphones (not supplied)
Be sure to turn down
the volume before
connecting or putting
on the headphones.
Stereo mini plug cord
(not supplied)
DO NOT turn off the System with the volume set to an extremely high level; otherwise,
the sudden blast of sound may damage your hearing, speakers, and headphones when you
turn on the System or start playback.
IN
AUD IO
PHO NES
Stereo mini plug cord
(not supplied)
External
device
EJECT
STAN DBY
ME
VOLU
Disc/USB
CE
SOUR
USB MEMO
RY
5V
500mA
AUDI O
IN
ES
PHON
How to select a number
using the remote control
USB mass storage
SOUND MODE
ORY
USB MEM
class device
1
2
3
500m A
5V
HBS
4
5
6
7
8
9
FADE MUTING
VOL
0
10
Prohibiting disc ejection
REMOTE CONTROL
You can lock the disc tray so that no one can eject the
loaded disc.
While the disc tray is closed...
Examples:
(On the main unit)
To select number 5, press 5.
To select number 20, press 10, 2, then
and
0 (when "- -" appears), or press 10, 0, 2,
(hold for 5 seconds
then 0 (when "- - -" appears).
DISC LOCKED
at the same time)
To select number 125, press 10, 1, 2,
then 5.
•
When you lock the disc tray, "DISC LOCKED" is scrolled
on the display. "DISC UNLOCKED" is scrolled on the
display when you unlock it.
Remote sensor
E
VO LUM
3 3
Adjust the volume.
USB MEM
ORY
500 mA
5V
1 1
1
1
2 2
2 2
3 3
(European model)
(RM-SRDN1R/RM-SRDN1WR)
Playback operation
1
2
Start playback of the external device.
Label side
Notes on USB mass storage class device connection
Playback operations
•
Connect a USB mass storage class device when the
System is turned off to prevent malfunction.
•
Do not use a USB hub.
•
When connecting with a USB cable, use a USB 2.0
cable whose length is less than 1 m (39–3/8 inches).
•
The USB mass storage class device is charged through
the USB MEMORY terminal when "USB" is selected as
the source. (Some USB mass storage class devices may
not be charged through the USB MEMORY terminal
To open the disc tray
Press 0.
even if "USB" is selected as the source.)
•
You cannot connect a computer to the USB MEMORY
To play back/pause a disc or USB mass storage class
terminal of the System.
device
•
Electrostatic shock at connecting a USB mass storage
Press 6.
class device may cause abnormal playback of the
To select a track
device. In this case, disconnect the USB mass storage
Press ¢ or 4.
class device then reset the System and the USB mass
To fast-forward a track
storage class device.
Press and hold ¢.
•
While playing back or recording a file onto a USB mass
storage class device, do not disconnect the device.
To fast-reverse a track
Press and hold 4.
Doing so may cause malfunction on both the System
and the device.
To select a group (MP3/WMA only)
Press 5 or ∞.
To stop playback
Press 7.
DISC UNLOCKED
Searching for stations
1
2
(Hold)
(Hold)
FM radio
The station search stops when a station of sufficient
signal strength is found.
To manually stop the search, press 5 or ∞.
•
When you press 5 or ∞ repeatedly, the frequency
•
changes step by step.
Improving the reception
When an FM stereo broadcast is hard to listen...
(European model)
(Other models)
MONO
•
When the monaural mode (MONO) is activated, the
reception is improved. However, the stereo effect is lost.
•
When the stereo mode (ST) is activated, you can listen
to the radio in stereo when a program is broadcast in
stereo.
2
2
3 3
(Other models)
(RM-SRDN1A)
iPod
Repeat Play
During playback...
REPEAT1
REPEAT
Canceled
REPEAT GROUP
(No indication)
(MP3/WMA only)
REPEAT 1
Repeats the current track.
REPEAT
Repeats all tracks.
Repeats all tracks in the current group
REPEAT GROUP
(MP3/WMA only).
Random Play
1
Select a source and stop playback.
or
2
REPEAT1
REPEAT
Canceled
(No indication)
REPEAT GROUP
RANDOM
(MP3/WMA only)
Playback starts in a random order.
Random Play ends when all tracks have been played.
•
You cannot select a track with the number buttons
during Random Play.
2
Presetting stations
Receiving FM stations with Radio Data
System (Europe only)
You can preset up to 20 FM stations.
Radio Data System allows FM stations to send an
While listening to a target station...
1
additional signal along with their regular program
signals.
•
If you want to know more about Radio Data System,
visit <http://www.rds.org.uk>.
To display the Radio Data System information
Preset number
2
Select a preset number.
PS (NO PS*)
PTY (NO PTY*)
Frequency
(No-radio Data System signal)
*
Displayed if related signals are not sent by a station.
•
To select a number, see "How to select a number
PS (Program
Commonly known station names.
using the remote control" in the bottom left of the
Service)
page.
PTY (Program
Types of broadcast programs.
Type)
3
RT (Radio Text) Text messages the station sends.
•
When a Radio Data System signal is not received, the
frequency is displayed.
ST
Tuning in to a preset station
Switching temporarily to a program of
your choice automatically (Europe only)
The Enhanced Other Networks function allows the
System to switch temporarily to a preset FM station
•
You can also use number buttons on the remote
broadcasting a program of your choice (NEWS or INFO).
control.
•
This function works while listening to the FM station
providing the required signals.
While listening to the FM station...
Notes on iPod connection
•
When detaching the dock adaptor from the dock,
pull up the dock adaptor with your fingernail or sharp
iPod
pointed tool using the slot.
Be careful not to injure your fingertips
or damage the terminal of the direct
dock.
Dock adaptor (supplied
•
DO NOT connect or disconnect the iPod when the
with the iPod or sold
System is turned on.
separately)
•
Be sure to reduce the volume on the System to the
minimum level before connecting iPod. Adjust the
volume after starting playback.
•
You cannot send any data to the iPod from the System.
•
Do not carry the System with iPod connected. It might
cause damage to the dock or you might drop the iPod.
•
Do not touch or hit the iPod terminal pins or connector
pins in the iPod dock directly. Doing so might cause
damage to the connector pins.
•
iPod is charged through the dock when the System is
turned on.
Recording operations
Program Play
1
Select a source and stop playback.
Before you start recording
• It should be noted that it may be unlawful to
or
re-record pre-recorded tapes, records, or discs
without the consent of the owner of copyright for
2
the sound or video recording, broadcast or cable
program and for any literary, dramatic, musical, or
artistic work embodied therein.
The use of the files recorded on a USB device with
3
this System, except for personal use, is prohibited.
Select a track number (up to 32 tracks).
Transferring or selling the files you recorded
For audio CD:
violates the copyright law and may subject you
to civil and criminal penalties for copyright
infringement.
• The volume and sound adjustments (see page 1) do
not affect recordings.
For MP3/WMA:
(1) Select a group.
• Random Play and Repeat Mode are canceled during
recording.
• Tracks which are recorded onto a USB mass storage
class device will be converted into MP3 format (at a
sampling rate of 44.1 kHz and bit rate of 128 kbps.)
(2) Select a track.
Recording from a Disc
You can record tracks from an Audio CD to a USB mass
storage class device.
4
Before recording...
To erase the entire program, press 7 repeatedly.
Connect a recordable USB mass storage class device to
•
the USB MEMORY (
) terminal.
1
Select CD as a source and stop playback.
2
Start recording.
(twice)
PTY search (Europe only)
You can search for a program from the preset stations by
specifying PTY code.
While listening to a station...
1
2
Select a PTY code.
RT (NO RT*)
3
Start searching.
When the System finds the one you have selected, that
station is tuned in.
•
To stop searching, press PTY SEARCH.
•
To search for another station, press PTY SEARCH while
the indications are flashing.
•
If no program is found, "NO FOUND" appears.
NEWS
INFO
Canceled
(No indication)
Playback operations
iPod
*
Information shown on the display differs depending
on the type of the iPod.
To play back/pause iPod
Press 6.
To select a track
Press ¢ or 4.
To fast-forward a track
Press and hold ¢.
To fast-reverse a track:
Press and hold 4.
To play back repeatedly
Press RPT/RND repeatedly.
To put iPod in sleep mode
Press and hold 6.
• Do not vibrate the System while recording tracks. It
may damage the recorded tracks.
•
The System will automatically create the new group
as "CDREC01. "
•
When playback ends, recording automatically stops.
To stop recording manually, press 7.
•
•
To record a single track, press RECORD twice during
playback of that track.
•
To record programmed tracks, press RECORD twice
while Program Play is stopped.
Erasing a track
You can erase tracks on the USB mass storage class
device.
• Once the track is erased, you cannot resume it.
Before erasing...
Connect a USB mass storage class device to the USB
MEMORY (
) terminal.
1
Select USB as a source and start playback.
2
Select a track you want to erase.
3
Erase the track.
(twice)
Advertisement
