Table of Contents
Advertisement
Global Gain
This can set a global increase or attenuation of the amplitude of the
entire Sample Instrument . Any individual amplitude differences between
the samples will not be altered . Set the value expressed in dB:s in the
value box, confirming this by pressing enter, or with the increment/
decrement buttons .
Range: -9.0 to + 9.0 dB
Sample Gain
This allows you to change the amplitude on each individual sample .
The amplitude after a gain change will be indicated with the horizontal
line in the Grid . Set the value expressed in dB:s in the value box, con-
firming this by pressing enter, or with the increment/decrement buttons .
Range: -9.0 to + 9.0 dB
Keyboard Gain graph
This graph will reflect any changes that you make with the Keyboard
Gain controls . These settings will affect the entire Sample Instrument,
and can be used to apply various adjustments that will change the am-
plitude across the range of the keyboard . If for example the lower range
in the Sample Instrument is too loud, you can apply an attenuation that
begins at a chosen octave . The sample in focus will be indicated as a
yellow slice .
Reset All
This will reset any settings that you have made using the octave gain
controls .
Octave gain controls
Allows you to apply a gain change to a range, which will start at the
preset keys C1, C2, C3 etc .
C4 represents the middle C on the Nord Electro 3, when the Octave
Shift control is set to 0 . Set the value expressed in dB:s in the value
box, confirming this by pressing enter, or with the increment/decrement
buttons .
Ranges: -9.0 to + 9.0 dB
Detune
You can change the overall tuning of the samples, either on a global
scale or for any individual samples . This provides you with the means
to fix any problems with samples that are out of tune, or to adjust an
entire Sample Instrument . The unit is in cents, 100 cent is the range
between two semitones .
Reset All
This will reset any changes that you have made using the Detune
controls .
Global Detune
Sets the overall tuning of the Sample Instrument . Enter the value ex-
pressed in cents in the value box, confirming this by pressing enter, or
with the increment/decrement buttons .
Range: -50 to 50 cents
Sample Detune
This allows you to detune the sample in focus in the Sample Instru-
ment . Set the value expressed in cents in the value box, confirming this
by pressing enter, or with the increment/decrement buttons . Each and
every sample in the Project can be detuned .
Range: -50 to 50 cents
Sample Zone
These controls makes it very easy to change the focused sample's
Root Key and Upper Key, in order to edit the assignment . The focused
sample will be highlighted in yellow, and you can quickly select focus
by clicking on the keys in the Keyboard grid or by scrolling through the
samples using the horizontal arrow keys on the computer keyboard .
Root Key
Sets a new Root
Key for the focused
sample . There can
only be one sample assigned to each Root Key, the value will automati-
cally skip to the next available note .
Range: F0 to C8
Upper Key
Sets a new Upper Key for the focused sample . The available range
may be limited by samples that occupy a Root Key higher up on the
keyboard . The Upper Key can not be a key that is located lower than
the Root Key on the keyboard .
Range: F0 to C8
Enabled
This allows you to disable and re-enable the focused sample .
Transpose
Use the buttons to transpose the entire Sample Instrument in semi
tone steps .
Auto Map
This function can be used to quickly enable and disable samples at
certain intervals in order to reduce the amount of memory used by the
Sample Instrument . This is a great way to quickly experiment with the
Sample Instrument without having to delete and/or re-assign samples .
Interval
Set the interval or range between the
samples that will be kept enabled .
8NordsaMplEEditor
| 39
Hide quick links:
Advertisement
Table of Contents
