Menu Organization (Computer Mode) - Sony HVR-Z7E Operating Manual

Digital hd video camera recorder and memory recording unit
Hide thumbs Also See for HVR-Z7E:
Table of Contents

Advertisement

Menu organization (COMPUTER mode)

root
HDV
Operate in the VIDEO mode. Set this mode when reading or
writing HDV stream data on a CompactFlash in this unit
using editing software.
DV-NTSC
Operate in the VIDEO mode. Set this mode when reading or
writing DV (NTSC format) stream data on a CompactFlash in
this unit using the editing software.
DV-PAL
Operate in the VIDEO mode. Set this mode when reading or
writing DV (PAL format) stream data on a CompactFlash in
this unit using the editing software.
DRIVE
Operate as an external removable media of the computer.
(Default setting)
SETTING
You can set this when in VIDEO mode.
Settings are reflected in setting in the VIDEO mode operation
when connecting to a camcorder.
For details about setting, refer to "Menu organization
(VIDEO mode)."
HDV
DV-NTSC
DV-PAL
DRIVE
SETTING
TC FORMAT
DV FILETYPE
CAMERA NO
*Boldface settings are default settings.
AUTO
NDF
DF
AVI
RAW DV
Notes
• For the following cases, operate "Safety remove Device (for
Windows)" or "Remove by putting the media icon into the
trash (for Mac OS)" etc., and check that the access lamp
turns off.
– When switching the each modes DRIVE, HDV or DV-
NTSC, DV-PAL
– When disconnecting the i.LINK cable from the computer
– When turning off the power of this unit
To recognize this unit again after these operations,
disconnect i.LINK cable from the computer once, then
reconnect it.
• Depending on the video editing software, this unit may not
be recognized without switching the mode before starting
the software.
• If you change the operation mode frequently, the computer
and this unit may not communicate correctly. Switch the
mode of this unit at intervals about 5 seconds or more.
• HDV, DV-NTSC, and DV-PAL mode may not be
recognized because of a limitation of the computer when
switching them directly.
If that situation occurs, disconnect this unit from the
computer, then select the mode.
• If the combination of the settings of the editing software
(HDV/DV-NTSC, DV-PAL) and this unit are incorrect,
images may be distorted or recognized incorrectly.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-mrc1Hvr-z7pHvr series

Table of Contents