Installing The Usb Driver; 4-A Before Installation - Sekonic SR-430 Operatiing Manual

4.Installing the USB Driver

4. Installing the USB Driver
The USB driver must be installed to use this product over a USB interface connection. If using this
product over a RS-232C connection, the driver does not need to be installed, and the procedures in this
chapter are not necessary.

4-A Before Installation

To use a USB interface connection, load the supplied CD-ROM, and install the driver by following
the installation procedure in this chapter.
Be sure to install the USB driver before inserting the SR-430 into the computer's USB port. The
driver cannot be installed properly if the SR-430 is inserted into the USB port first.
Notes
• If you accidentally connect the SR-430 before performing the installation, delete the falsely-
identified driver from "Add or Remove Programs".
• To install the driver, you must log in as a user with administrator privileges.
Operating Environment
*1 Professional Edition SP4 or later
*2 Home/Professional Edition SP2 or later
*3 Home Basic/Home Premium/Business/Ultimate
*4 • The OS must be preinstalled.
• The software may not work for certain computer models and configurations.
• Operation is not guaranteed for systems with an upgraded OS, add-on USB interface, self-
built computers, built-to-order computers, and in emulator environments (such as VirtualPC).
• Operation is not guaranteed for connections that pass through a USB hub.
• A drive capable of reading CD-ROMs is required for installing the software.
-6-