JVC XA-F107A Instructions Manual page 64

BASIC OPERATIONS
1.
After turning on the player, press MENU button and ¢ / 4 button
to select FM mode from Main Menu, and then press 3 8 button to
enter that mode. ("Radio" appears.)
2.
Press 7 button to enter scan mode. ("Scan" appears.)
3.
To manually scan: Press ¢ / 4 button.
("M.Scan" appears. Then, each time the button is pressed, the
frequency increases or decreases step by step.)
To search for a station: Press and hold ¢ / 4 button.
("S.Scan" appears and an available station is automatically
detected.)
• You cannot use M.Scan and S.Scan functions at a time.
4.
When you use M.Scan, press 3 8 button. When you use S.Scan,
press 7 button. ("Store" and preset No. appear.)
To cancel store, press 7 button to return to scan mode.
5.
Press ¢ / 4 button to select the desired preset No. you want to
store.
6.
Press 3 8 button to store the station.
The player enters radio mode. ("Radio" appears.)
7.
Repeat Steps 2 to 7 to continue preset operation.
To tune to preset station (Radio mode):
You can listen to up to 20 preset stations. Before use, you need to
preset stations in scan mode.
1.
After turning on the player, press MENU button and ¢ / 4 button
to select FM mode from Main Menu, and then press 3 8 button to
enter that mode. ("Radio" and Preset No. appear.)
2.
Press ¢ / 4 button to select the desired preset No. (P01 to P20).
To switch between Stereo and Mono, press 3 8 button.
To delete preset station (Radio mode):
In radio mode, select the desired preset No. and then press and hold
3 8 button until "Delete" appears.
The preset No. temporarily disappears and the default station is set.
To exit radio mode:
20
Press MENU button
.