JVC XA-F107A Instructions Manual page 89

Digital audio player
Hide thumbs Also See for XA-F107A:
Table of Contents

Advertisement

TROUBLESHOOTING
Problem
The player does not
function.
There is no sound or
a lot of noise.
The battery life is
short.
The player suddenly
stops working.
The display is too
dark or too bright.
The player
automatically shuts
off.
Your computer does
not recognize the
player.
Solution
• Make sure the HOLD switch is off.
• Battery may be drained. Charge the battery.
• Make sure the headphone plug is correctly
connected to the player.
• Wipe the headphone plug with a clean cloth.
• Keep the player away from other equipment,
such as mobile phones or televisions.
• Turn the volume up.
• Battery charging time is insufficient. Keep
charging until "
• The built-in battery may have reached the
end of its life. Consult the JVC Service Center
and replace it with a new one if necessary.
• Press the reset switch by inserting a thin
object (for example a pin or a straightened
paperclip) into the hole on the back of the
player to turn the unit off, and then turn the
player back on. (Files and settings stored in
the memory will not be deleted.)
• Adjust the contrast.
• Auto power off function is set in effect. See
page 33.
(This is not a malfunction.)
• If your operating system is Windows 98SE,
be sure to install the USB driver from the
supplied CD-ROM in your computer.
" appears.
45

Advertisement

Table of Contents
loading

Table of Contents