Flashing Display Lights; Using The Dishwasher - GE ADW1000 Owner's Manual

Flashing display lights (model GSD3900 only).
Lights What It Means
This is normal.
The START/RESET pad
has been pressed.
START START
RESET
Control Error
CLEAN CLEAN
PLUS A
BEEPING
SOUND
Control Error
NORMAL
PLUS A
BEEPING
SOUND
Using the Dishwasher Door (model GSD3900 only)
1 The door must be closed and locked into place to select a LOAD SELECTION or an OPTION.
If the door is opened during a cycle and left open, the dishwasher will beep once every minute until the door
2
is closed and latched into place.
What To Do
Allow the dishwasher to drain and reset before you start a new wash cycle.
Press the START/RESET pad to turn off the beeper. If the CLEAN light continues
to flash, call for service.
Press the START/RESET pad to turn off the beeper and the dishwasher will
attempt to reset. Then restart the wash cycle. If this error continues, call
for service.
ge.com
9