Table of Contents
Advertisement
Edit To Or From Another Recorder
You can use your unit as the source player or as the recording
deck.
NOTES:
When using another recorder as the recording deck, refer to its
instruction manual.
It is not possible to dub copy-protected contents. An error
message will appear on the TV screen.
A When using your unit as the source player
TV receiver
Player
Another recorder
Recorder
B When using your unit as the recording deck
TV receiver
Player
Another recorder
Recorder
Slide the TV/CABLE/DBS/DVD switch to DVD.
1
Make connections.
A When using your unit as the source player:
^ connect its [S-VIDEO/VIDEO/AUDIO OUTPUT] connectors
B When using your unit as the recording deck:
^ connect its [S-VIDEO/VIDEO/AUDIO OUTPUT] connectors
When connecting to another recorder with S-video connector,
set AREAR AUX L-1B or AFRONT AUX F-1B to AS-VIDEOB.
2
Press CH +/- to select the external input.
Select AF-1B when the source player is connected to the unit's
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
Your unit
front panel, and select AL-1B when it is connected to the unit's
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
rear panel.
3
Press REC MODE repeatedly to set the recording mode.
4
Engage the Play mode on the source player.
5
Engage the Record mode on the recording deck.
6
Stop recording on the recording deck, then stop playback on
the source player.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 72)
Your unit
to the input connectors on another recorder.
on the front or rear panel to the output connectors on
another recorder.
EDITING
63
EN
Advertisement
Table of Contents
