Table of Contents
Advertisement
0-9
CANCEL
ENTER
S
I
CLEAR
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a program (DVD-RAM,
DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/
SVCD and Audio CD).
1
Press ON SCREEN twice to access the on-screen bar.
2
Press D E to select Aj9B, then press ENTER. The pop-up
window appears under the selected item.
TITLE 99
CHAPTER 99
DVD-
VIDEO
3
Press the number keys to enter the time, then press ENTER.
Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
TIME
Press 1
TIME
Press 5
TIME
If you have specified a wrong selection,
Press RETURN on the remote control and repeat the above
procedures from step 2.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
When A7B is displayed on the TV screen in step 3, you have
selected a point that exceeds the recording time of the disc.
Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases, A7B
is displayed on the TV screen as well.
This function is not possible for a Video CD/SVCD with PBC
function.
CABLE/DBS
TV
DVD
FGDE
RETURN
T
ON SCREEN
EACH 0:00
CINEMA AUTO
TIME
Press 2
TIME
Press 0
BASIC OPERATIONS ON DVD DECK
Simulated Surround Effect
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your 2-
channel stereo system.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press D E to select A
A3D-ONB appears above the selected item and Simulated
Surround Effect is activated.
Each time you press ENTER, A3D-ONB appears and disappears
alternately.
TITLE 99
CHAPTER 99
DVD-
VIDEO
To clear the on-screen bar
Press ON SCREEN.
To cancel the simulated surround effect
Press ENTER to clear A3D-ONB from the screen.
NOTES:
Simulated Surround Effect works correctly only when playing
back a title recorded in multichannels.
Simulated Surround Effect does not affect the DVD VIDEO
bitstream signal from the [DIGITAL AUDIO OUT] connectors.
When Simulated Surround Effect is activated, the settings of
AANALOG AUDIO OUTB and AD. RANGE CONTROLB are
disabled. (A pg. 70)
Simulated Surround Effect cannot be activated under the
following conditions:
When the HDD deck is in the recording mode.
When the HDD or DVD deck is in the timer standby mode.
When a disc containing both the Dolby Digital 5.1CH and 2CH
sound formats is playing back a scene that is not in the 5.1CH
sound format.
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press D E to select A
window appears under the selected item.
TITLE 99
CHAPTER 99
DVD-
VIDEO
3
Press F G to select the desired option, then press ENTER.
NORMAL
:
Normally select this option.
CINEMA
:
Suitable for a movie disc, etc.
SHARP
:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-colored surfaces such as cartoons.
SOFT
:
Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.
B, then press ENTER.
EACH 0:00
3D-ON CINEMA
B, then press ENTER. The pop-up
EACH 0:00
CINEMA AUTO
31
EN
AUTO
Advertisement
Table of Contents
