Notes - Buffalo HD-CELU2 DriveStation FlexNet User Manual

Notes on Use
With a LAN connection, the maximum file size is 127 GB. Files larger than 4 GB
will not be accessible from the USB interface.
If no DHCP server is available, the IP address of the device will default to
192.168.11.150. In that case, change your PC's IP address to 192.168.11.xxx to
access the DriveStation or use the DriveNavigator Wizard.
When in LAN mode, up to 8 clients can access the drive at the same time.
Do not switch between USB and LAN modes during file access. A blinking Power/
Access LED can indicate file access.
With a USB connection, the maximum file size is 4 GB.
If your PC can not reboot properly after installing the software package, uninstall
the sleep mode control software to resolve.
Before changing from USB mode to LAN mode, use the 'Safely Remove Hardware'
wizard to disconnect the USB connection properly.
The SecureLockMobile utility is stored in the shared folder of the drive. It's also
on the CD at \Tool\SLM\slm.exe. SecureLockMobile works with both USB and
Ethernet connections.
The power save utility on the CD is for USB connection only. Use the power save
settings in the web admin to set power settings in LAN mode.
Up to 10 HD-CELU2 units may be set up on the same network.
1