Checking Connection With The Adapter - Netis WF-2301 User Manual

3. Press Apply to complete this operation and close the window.

3.2 Checking Connection with the Adapter

After configuring the TCP/IP protocol, use the ping command to verify if the computer can
communicate with the AP. To execute the ping command, open the DOS window and Ping the IP
address of the 150Mbps Outdoor AP at the DOS prompt:
Ø
For Windows 98/Me: Start → Run. Type command and click OK.
Ø
For Windows 2000/XP: Start → Run. Type cmd and click OK.
Ø
For Windows Vista/7:Start→ Type cmd at the start search bar and press the Enter.
Ø
For MAC OS→ The system will complete this operation automatically.
At the DOS prompt, type the following command:
If the Command window returns something similar to the following:
150Mbps Wireless-N Outdoor AP User Manual
Figure 3-22