Dv Deck - JVC HR-DVS2U Instructions Manual

DV record indicator
T
1
4
NUMBER
7
SP/LP
1
PLAY
REC
ENTER
W
2 3
2
5 6
8 9
0
4
CH
DV S-VHS
PAUSE

DV Deck

LOAD A CASSETTE
1
Insert a Mini DV cassette with the erase protection
switch set to "REC".
SELECT DV DECK
2
Press DV.
SELECT RECORDING
CHANNEL
3
Press CH +/–. Or press the appropriate NUMBER keys,
then press ENTER. (The channel changes after a few
seconds whether you press ENTER or not.)
SET TAPE SPEED
4
Press SP/LP to set the recording speed.
START RECORDING
5
Press and hold REC and press PLAY on the remote
control, or press REC on the VCR's front panel. The DV
record indicator ( ) lights.
PAUSE/RESUME
RECORDING
6
Press PAUSE. Press PLAY to resume recording.
During record pause, you can change the recording
channel by using the CH +/– buttons or NUMBER keys.
STOP RECORDING
7
Press STOP. The DV record indicator ( ) goes off. Then
press EJECT on the DV deck to remove the cassette.
NOTES:
It is not possible to record a TV program on both the VHS
deck and the DV deck simultaneously.
In addition, it is not possible to record simultaneously from
the same external input.
When you record a tape on the DV deck with the recording
speed set to "LP", we recommend that you play that tape back
on this deck. Digital video recorder from other manufacturers
may not be able to play the tape properly.
23
EN